It’s All Done With Mirrors

First off, this tip is  most beneficial when you have in large sheets of sequenced veneer.  But since I did not have any in hand I pulled out this Woodcraft mini-pack to use for my demonstration.

Indexing: When I open up any pack (large or small) of sequenced veneer the first thing I do is grab a pencil and number the pieces in one of the corners.  Since the manufacture has sequenced the veneer this will help you keep the the pieces in the order that they were cut from the log.  If you intend to do any book-matching with your veneer this will help you in the layout out of that so your growth rings match more closely.  (That we’ll expand on in another posting.)

Book-matching: When I start with a simple book-matching project I like to play around and see what pattern will look best for my project.  Since most burl is brittle and I don’t want to damage the sheets flipping them over trying to find a good match I simply grab a mirror.  This way I can position it anywhere on the top piece of my veneer stack (2 pieces) without worrying about  damaging them and I’m able to visually see immediately what the resulting match will be.

Once I find a match I like I use the mirror as a guide and grab a pencil to put a couple of registration marks on the veneer.  From here I  go to registering the pieces, taping them together, and start cutting them to size to use  with the project.

Quad Book-matching: If I’m going for a really cool look on say a table top I’ll grab 2 mirrors (oh and 4 pieces of veneer) and hold them at a 90 degree angle and can see visually see what that will look like.  By doing this I’m able to move all over the piece (remember the note about large pieces of veneer) until I find the pattern that really pops!

Other Uses: Also by using two mirror you can bring the angle in (under 90 degrees) and use the same procedure to get an idea of how a radial book-match would look.

Popularity: 41% [?]

March 9th, 2010