“If You’re Not Feeling It, Don’t Do It!”

So let me start off with this: “Have you ever had one of those days where you shouldn’t be in the shop?”

You know, one of those days where everything turns out to be a PITA?!?

Well today was MY day!

Due to our schedules at home/work it’s been a while since I’ve been able to work on the federal inlay table and I needed to finish up the inlay on the apron.

I’ve had the semicircles on the ends done since my blog entry on Stringing Tight Curves. But since then I had not finished “connecting the dots” so to speak until today.

But I should have known better. I wasn’t in the mood to do it.

And I had other junk to do:

• computer & virus updates to install
• the Olympics was on
• laundry to be done
• yadda, yadda, yadda

But I needed to get this project moving.  Either that or submit my entry to the “Worlds Longest Time To Complete A Project” contest.

So anyway, against my better judgment, I went out and turned the heaters on so the shop could warm up and then started cutting/trimming pieces of inlay to size and made a quick 45 degree jig to help cut the scarf joints so I could glue the pieces into the my apron.

All in all, I only had 6 pieces to fit and it should have taken about an hour to do (taking my sweet time in all) but NO! Everything that could go wrong did.

It didn’t matter how many times I dry fitted the pieces into my apron, no matter how well the scarf joints went together, every time I put glue into the groove trouble would show its face.

I had 4 pieces just break, one that broke once I had it in but had to dig out with dental tools, (because the glue started setting and fit was that tight) way more glue squeeze out then I intended to clean up, and anything else you could come up with!

But in the end of day I got it all worked out but wow what a pain!  So next time you’re not “feeling it” take a hint, it might not be worth it!

BTW as a side note. Dental tools are great for working with inlay but get them from a dentist. The 4 piece set they sell at Rockler are garbage! (Now that’s not a dig at Rockler, just a “impromptu review” of that particular product.)

Popularity: 4% [?]

February 14th, 2010